Canon has one of the most famous printers in the world. Their models are known for their excellent performance and consistent quality prints. However, all printers or drivers are quite flawed. Problems can occur due to technical and mechanical reasons beyond our control. Perhaps the most basic error users face Pixma MX922 Error Code B200.

Did you get this type of error when using the Canon mx922 error b200 or any other Canon model? This particular issue is very annoying and is frequently reported by many Canon printer users.

What is canon mx922 error b200?

Canon b200 error mx922 is common to long-term printer users. This type of error is displayed immediately, and once it occurs, you will not receive any warnings or signals. It degrades the printer’s critical performance by interrupting the signal that turns the device on and off. You will not be able to use the printer until you have permanently fixed the problem.
The printer’s LED display may show b200 error canon mx922. This error occurs during printing, and the printer turns off unexpectedly. This mainly occurs with the Canon WorkForce Series Cannon mx922 error b200 models.

What Causes Cannon mx922 b200 error?

The error code is a type of notification in the event of a printer internal hardware problem. It may be due to a malfunction of the motherboard or other types of internal components. If this error appears on the screen, some printer’s internal components may not be functioning properly.
If you receive Canon mx922 on your error code b200 or other WorkForce printers, do not panic. Follow these simple troubleshooting steps before sending your printer to a repair shop.

How to troubleshoot to fix mx922 b200 error:

1. Disconnect everything from the printer

You must cancel the print job and clear all paper jams from the printer before you can continue. This method is relatively easy and may work depending on the cause of the error. When all paper jams are cleared, disconnect all cables connected to the printer. Includes USB cable, power cable, power cord, and ink cartridge.
Press and hold the printer’s power button for 1 minute. Then reconnect everything, including reinstalling the Canon ink cartridges in their respective slots. Press the power switch/ button to turn on the printer and perform a test print. Check if there are any changes. If canon mx922 b200 error continues, or if you come back after printing a few pages, go to Troubleshooting Method 2.

2. Restart the printer

This troubleshooting technique is virtually the same as the first. All cables must be disconnected from the printer. Let the printer rest for about 5 minutes before continuing. Then hold the supremacy button for a minute. Press and hold the power button while reconnecting all cables. This method may require the help of others.
Press and hold the power button again for 1 minute, then release it. Run a test print to see if there are any improvements. If the b200 error canon mx922 persists, the last method may be the solution.

3. Clean the printhead

A dirty and clogged printhead can be the result of an Canon B200 error. In this case, the solution is to clean the printhead completely. To clean the Canon printer printhead:
Step 1: Remove each ink cartridge from the printhead one by one. Place the ink cartridge (upside down) on clean paper or towel. Then conscientiously withdraw the printhead from the printer.
Step 2: Wipe the underside of the printhead completely with a clean, lint-free cloth moistened with lukewarm water. Continue cleaning the nozzle area until no black ink adheres to the cloth.
Step 3: Soak the printhead in a bowl of warm water for 10 minutes. Do not use boiling water. Place a clean paper towel on the base and place the printhead on it to soak. Remove the printhead from the container and gently wipe off water and moisture with a dry, lint-free cloth.
Step 4: Place the printhead on a paper towel and let it air dry for 15 minutes. Then put the printhead back into the carriage and reinstall all the cartridges in their respective slots. Turn on the printer and see if there are any changes.

4. Install and update the printer driver

Malware may also be the main reason behind Canon b200 error mx922. In that case, install or update the printer malware protection.
The final step to fix Canon error code 0x97
Is Canon’s Printer Warranty Still Valid? If that doesn’t work, you can contact customer service for troubleshooting assistance and then ask customer support for possible troubleshooting options.

LEAVE A REPLY

Please enter your comment!
Please enter your name here